Terms & Conditions
These terms and conditions apply between all Users of this Website (including but not limited to Members), and MRCL TECH LTD, the owner(s) of this Website. Additionally these terms and conditions apply to the use of and (where applicable) purchase of MRCL TECH LTD Products and Services, including but not limited to advertising with MRCL TECH LTD. Please read these terms and conditions carefully, as they affect your legal rights.
1. Acceptance of Terms
1.1 Your agreement to comply with and be bound by these terms and conditions is deemed to occur upon your first use of the Website. By using the Website and agreeing to these terms and conditions, you represent and warrant that you are at least 18 years of age. Your access to and use of the MRCL TECH LTD Website or Services is subject (unless expressly stated otherwise) exclusively to these terms and conditions. You will not use the Website for any purpose that is unlawful or prohibited by these terms and conditions. By using the Website you are fully accepting the terms, conditions and disclaimers contained in these terms and conditions. If you do not agree to be bound by these terms and conditions, you should stop using the Website immediately.
1.2 MRCL TECH LTD reserves the right to change these terms and conditions without notice, and Users agree to be bound by such changes. It is the responsibility of Users to check these Terms and Conditions regularly for any changes.
1.3 If you are entering into these terms and conditions on behalf of your employer or acting as an employee, you warrant that you are authorised to enter into legally binding contracts on behalf of your employer. You further warrant that your employer agrees to be bound by these terms and conditions.
2. Intellectual property and acceptable use of Content
2.1 Content is available via MRCL TECH LTD and this Website on a free of charge basis and in consideration for a specified payment.
2.2 All Content included on the Website, unless uploaded by Users, Members or Partners or as stated otherwise, is the property of MRCL TECH LTD our affiliates, licensees or other relevant third parties. By continuing to use the Website Users acknowledge that such Content is protected by copyright, trademarks, database rights and other intellectual property rights. Nothing on this site shall be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark, logo or service mark displayed on the site without the owner’s prior written permission;
3. Prohibited use of the Site by Users
3.1 Users are expressly forbidden to download, store, reproduce, transmit, display (including without limitation via an intranet or extranet site), copy, sell publish, distribute, provide access to Content for any purposes other than as set out herein or to sub-license, rent, lease, transfer or assign any rights in Content, to any other person, commercially exploit or use Content for any unlawful purpose.
3.2 With regard the uploading, or posting of User Generated Content, and use of the site more generally, Users may not use the Website for any of the following purposes:
3.2.1 in any way which causes, or may cause, damage to the Website or interferes with any other person’s use or enjoyment of the Website;
3.2.2 in any way which is harmful, unlawful, illegal, abusive, harassing, misleading, inaccurate, threatening or otherwise objectionable or in breach of any applicable law, regulation or governmental order.
4. Availability of the Website and Disclaimers
4.1 The Website and Services are provided “as is” and on an “as available” basis. MRCL TECH LTD gives no warranty that the Website or Services will be free of defects and/or faults. To the maximum extent permitted by the law, MRCL TECH LTD provides no warranties (expressed or implied) of fitness for a particular purpose, accuracy of information, compatibility and satisfactory quality. MRCL TECH LTD is under no obligation to update information on the Website.
4.2 Whilst MRCL TECH LTD uses reasonable endeavours to ensure that the Website is secure and free of errors, viruses and other malware, MRCL TECH LTD give no warranty or guarantee in that regard and all Users take responsibility for their own security, that of their personal details and their computers.
4.3 MRCL TECH LTD accepts no liability for any disruption or non-availability of the Website.
4.4 MRCL TECH LTD reserves the right to alter, suspend or discontinue any part (or the whole of) the Website including, but not limited to, any products and/or services available. These terms and conditions shall continue to apply to any modified version of the Website unless it is expressly stated otherwise.
5. Limitation of Liability
5.1 Nothing in these terms and conditions will: (a) limit or exclude our or your liability for death or personal injury resulting from our or your negligence, as applicable; (b) limit or exclude our or your liability for fraud or fraudulent misrepresentation; or (c) limit or exclude any of our or your liabilities in any way that is not permitted under applicable law.
5.2 We will not be liable to you in respect of any losses arising out of events beyond our reasonable control.
5.3 To the maximum extent permitted by law, MRCL TECH LTD accepts no liability for any of the following:
5.3.1 any business losses, such as loss of profits, income, revenue, anticipated savings, business, contracts, goodwill or commercial opportunities;
5.3.2 loss or corruption of any data, database or software;
5.3.3 any special, indirect or consequential loss or damage.
6. Website Content and Services
6.1 Except as otherwise expressly agreed to by MRCL TECH LTD in writing, information regarding MRCL TECH LTD products and Services is subject to change without notice.
6.2 Information about MRCL TECH LTD Products and Services made available on and/or through this Website shall not constitute a representation, warranty or other commitment by MRCL TECH LTD with respect to any product or service unless otherwise expressly agreed to by MRCL TECH LTD in writing.
6.3 Without limiting the generality of the foregoing, MRCL TECH LTD hereby disclaims all warranties, expressed or implied, as to the accuracy, suitability for any purpose or completeness therefore.
7. Third Party Content
7.1 This Website makes available certain Content that has not been created by MRCL TECH LTD either via hyperlinks which may take Users to websites not controlled or maintained by MRCL TECH LTD, or as hosted via the Website whether or not such Content is available free of charge, to Members only or for a fee, for example Partner Downloads, Member profiles and other materials posted by other Users on the Website blogs and forums (“Third Party Content”).
7.2 Any copying, distribution, reproduction, retransmission, or modification of any of the Third Party Content or any information or materials appearing in such Third Party Content, whether in electronic or hard copy form, is subject to the prior written permission of the author and publisher of such Third Party Content.
7.3 Third Party Content is not the responsibility of MRCL TECH LTD, and Users acknowledge and confirm that MRCL TECH LTD has no control over the opinions, information, legality of products, or accuracy of facts or statements contained in such Third Party Content and furthermore MRCL TECH LTD cannot guarantee and makes no representation or warranty as to the accuracy, veracity, or completeness of any such information provided. Nothing contained within Third Party Content necessarily represents the point of view of MRCL TECH LTD.
7.4 MRCL TECH LTD cannot and does not confirm each User’s identity, whether or not they are a Member. MRCL TECH LTD allows Members to give access to information about themselves to other Members but does not control the information provided by Users or Members.
7.5 In the event that you have a dispute or issue with one or more of the other Users, you agree to unconditionally release MRCL TECH LTD (and our officers, directors, agents, subsidiaries and employees) from any and all claims, demands and damages (actual and consequential) of any kind and nature, known and unknown, suspected and unsuspected, disclosed and undisclosed, arising out of or in any way connected with such disputes.
All media and advertising placed with MRCL TECH LTD shall be subject to the following:
8.1 All Advertisements are accepted subject to MRCL TECH LTD’s approval of the copy and to the space being available.
8.2 MRCL TECH LTD reserves the right to omit or suspend any Advertising (or part thereof) at any time for if MRCL TECH LTD holds the belief that publication may be unlawful, defamatory, put MRCL TECH LTD into disrepute, in breach of any Ofcom regulations, or Advertising Standards Agency (or like body) regulation or code, put it in breach of contract or infringes the copyright off a third party in which case no claim on the part of any Client for damage or breach of contract shall arise.
8.3 If MRCL TECH LTD considers it necessary to modify the space or alter the date or position of insertion or make any other alteration, the Client will have the right to cancel if the alterations requested are unacceptable, unless such changes are due to an emergency or circumstances beyond MRCL TECH LTD’s control. Every care is taken to avoid mistakes but MRCL TECH LTD cannot accept liability for any errors due to third parties, subcontractors or inaccurate copy instructions. In any event the Client acknowledges and confirms that its sole remedy for such inaccuracies in Advertisements will be for MRCL TECH LTD to use its reasonable endeavours to remedy such inaccuracies upon notice from the Client, where practicable. For the avoidance of doubt the Client accepts that Advertisements which have gone to print cannot be altered.
8.4 The Client will indemnify MRCL TECH LTD fully in respect of any claim made against MRCL TECH LTD arising from MRCL TECH LTD’s publication of any Advertisement or part thereof arising from a breach of any term, condition, undertaking or warranty given hereunder or otherwise to MRCL TECH LTD. MRCL TECH LTD may consult with the Advertiser as to the way in which such claims are to be handled, and may require the Client to enter as a party to any claim.
8.5 Advertisement rates are subject to revision at any time and orders are accepted on condition that, in the case of Advertising placed within an issue of the Magazine, that the price binds MRCL TECH LTD only in respect of the next issue to go to press. In the event of a rate increase, the Client will have the option to cancel the order without surcharge or continue the order at the revised advertisement rates.
8.6 Accounts are due for settlement within 30 days of the commencement of publication of the Advertising. In the event of any account becoming overdue, MRCL TECH LTD reserves the right both to suspend Advertising until such time as the sum owing is paid and to reduce any commission otherwise allowed to Advertising Agencies.
8.7 Advertisement copy should be supplied by the Client in accordance with the mechanical data stated on the rate card. Charges will be made to the Client or his Agent where the printers are involved in extra production work owing to acts or defaults of the Client or his Agent. These charges will be at the rate agreed prior to commencement of Advertising.
8.8 If copy instructions are not received by agreed Copy Date no guarantee can be given that proofs will be supplied nor corrections made and MRCL TECH LTD reserves the right to repeat the most appropriate copy, or insert a house advertisement for which the Client will be invoiced.
8.9 Total amount payable, by the Client, within the 30-day period, will be written in the ‘Gross Payment’ section of the order form, accompanying this document. Series bulk discount purchases must be paid in one payment, 30 days after invoice, unless otherwise stated.
8.10 In the case of the Client failure to make complete payment within 30 Days of the invoice date occurred, cumulative monthly interest, at a rate of 10% per month from the invoice date, will be added to the gross amount. If at any time legal fees and costs are incurred as a result in obtaining payment from the Client, those costs will be charged back to the Client.
8.11 Client’s materials which may be delivered to MRCL TECH LTD including but not limited to property and artwork are held by MRCL TECH LTD at Client’s risk and should be insured by them against loss or damage from whatever cause. MRCL TECH LTD reserves the right to destroy all artwork, which has been in his custody for twelve months from the date of its last appearance.
9.1. Prices for any of MRCL TECH LTD services or products are subject to change without prior notice. MRCL TECH LTD aim to regularly update all publicly available sources of price information via the Website to ensure that you have accurate information available to you when you order.
9.2. The description and price of any Service purchased hereunder will be confirmed in MRCL TECH LTD’s despatch note and/or invoice or at point of payment if purchased online.
10. Payment Policy
Unless specified herein or at point of purchase to the contrary, MRCL TECH LTD invoices for any Service are due for payment 30 days from their date. MRCL TECH LTD reserve the right to charge for costs and expenses incurred in recovering late payments, and to charge interest.
11.1 Dependence on MRCL TECH LTD Services: The contents of any of MRCL TECH LTD Services or the Website do not constitute advice and should not be relied on in taking, or refraining from taking, any decision or action. Under no circumstances shall MRCL TECH LTD be liable for direct, indirect, or incidental damages resulting from your use of information, commentary, advice or other content on the Website or Services. You agree to indemnify MRCL TECH LTD against any actions, claims, proceedings, or liabilities arising from your use of the Website or Services.
11.3 Force Majeure: If by reason of labour dispute, strikes, inability to obtain labour or materials, fire or other action of the elements, accidents, power or telecommunications failure, customs delays, governmental restrictions or appropriation or other causes beyond the control of a party, such MRCL TECH LTD is unable to perform in whole or in part its obligations set forth in these terms, then MRCL TECH LTD shall be relieved of those obligations to the extent it is thereby unable to perform, and such inability to perform shall not make MRCL TECH LTD liable to any other party.
11.4 Users may not transfer any of their rights under these terms and conditions to any other person. MRCL TECH LTD may transfer their rights under these terms and conditions where MRCL TECH LTD reasonably believes Users rights will not be affected.
11.5 These terms and conditions may be varied by MRCL TECH LTD from time to time. Such revised terms will apply from the date of publication. Users should check the terms and conditions regularly to ensure familiarity with the then current version.
11.6 These terms and conditions contain the whole agreement between the parties relating to its subject matter and supersede all prior discussions, arrangements or agreements that might have taken place in relation to the terms and conditions.
11.7 If any court or competent authority finds that any provision of these terms and conditions (or part of any provision) is invalid, illegal or unenforceable, that provision or part-provision will, to the extent required, be deemed to be deleted, and the validity and enforceability of the other provisions of these terms and conditions will not be affected.
11.8 Unless otherwise agreed, no delay, act or omission by a party in exercising any right or remedy will be deemed a waiver of that, or any other, right or remedy.
11.9 Full terms and conditions outlining the terms and conditions pertaining to the use and delivery of the MRCL TECH LTD recruitment website can be found within that section of the site.
11.10 These terms and conditions are compiled in English. In whatever case of discordance between the two texts or doubts about their interpretation, the English one will prevail.